Classic Audio Parts

BGW VX880 Stereo/Mono Bridged Power Amplifier "B" Stock 120V

Be the first to review this product

Regular Price: $3,630.00

Special Price: $1,815.00

Availability: In stock


Quick Overview

The BGW VX-880 is the top-of-the-line model in a line of robust amplifiers designed for commercial applications. Capable of 2000W x 2 (2 ohms), the VX880 can be used directly in 70V installations.

Amplifier may have minor cosmetic imperfections.

Comes complete with 3-year limited warranty.

BGW VX880 Stereo/Mono Bridged Power Amplifier "B" Stock 120V

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


Classic Audio Parts is authorized to offer these amazing BGW amplifiers at unheard of prices while they last. Units may have minor cosmetic flaws. All amplifiers are covered by BGW's 3-year parts and labor warranty. Built to commercial standards, the VX Series is ideal for use in fixed installations where the highest sound quality and reliability are a must. BGW VX880 Series Specifications Power Output Per Channel (EIA 490A test method, both channels driven) Stereo Mode, 8 ohms: 900W RMS per channel Stereo Mode, 4 ohms: 1500W RMS per channel Bridged Mode, 8 ohms: 2300W RMS 70 volt: 1300W RMS per channel SMPTE Intermodulation Distortion: Less than 0.008% at rated 8 ohm output Rise Time; 6 µs Slew Rate: 20 V/µs (stereo mode), 40V/µs (mono mode) LF Damping Factor: >300:1 (ref. 8 ohms) below 50 kHz Small Signal Frequency Response: 8 Hz - 56 kHz, +0/-3 dB; 20 Hz - 20 kHz, +0,-0.3 dB Crosstalk: > 90 dB @ 20 Hz - 20 kHz DC Offset Voltage: < ±10 mV (5 mV typical) Hum & Noise Level (8 ohms, 20 Hz - 20 kHz): > 110 dB < 880 W (unwtd.) bal. Voltage Gain: 34.7 dB Input Impedance (@ 8 ohm rated power): 11k ohms balanced or unbalanced Input Sensitivity: 0.775 Vrms for rated 8 ohm output Load Impedance: >= 4 ohms (stereo mode), >= 8 ohms (mono mode) Power Requirement: 15 A @ 100 V, 12 A @ 120 V, 7.5 A @ 230V, AC 50-60 Hz Dimensions Overall: (h x w x d) 5.25 (3U) X 19 X 18.8 (inches) Dimensions behind front panel (h x w x d) 5.25 X 17 X 18.7 (inches) Weight: 62 lbs (28.1 kg.) net, 70 lbs (31.75 kg.) shipping Control: One 21 position detented rotary control precision input attenuator per channel. One (1) dB attenuation steps. Switches limiter on/off No bridged operation Yes dual mono mode Yes ground lift Yes subsonic filter Yes faastLinkTM Yes Cooling Continuously variable fan speed based on accurate temperature sensing of heatsink modules. Front - to - rear air flow Polarity Convention XLR Pin out: pin 2 = + pin 3 = - pin 1 = ground Warranty 3 Years standard, parts/labor

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.